24V to 230VAC 2000va 3000va Line Interactive UPS
Product Description
We are an experienced and professional supplier and power solutions provider of the OEM/ODM online industrial UPS for industry and electricity with the advanced technologies of DSP, PWM and IGBT components. Our customized UPSs are widely used in factories, power plants, petrochemical industries, offshore drilling platforms, airports, high-speed rail transportation, and also in the telecom, defense, semiconductor and steel industries.We have the ability to make the OEM/ODM UPSs with the capacity ranged from 1KVA to 800KVA. Please provide us with yourselves specifications and we will make safe, smart and saving UPSs for you.
Product Description:
Al Series Online UPS for Electricity (4kVA, 5kVA, 6kVA - DC220/110)
Single-Phase Input / Single-Phase Output
Three-Phase Input / Single-Phase Output
Model: AL-ELE
Type: Online
Input AC Voltage: 1P2W 220VAC or 3P4W 380VAC
Input DC Voltage: DC220V(rated voltage), Range: DC180V ~DC270V
DC110V(rated voltage), Range: DC90V ~DC135V
Input Frequency: 50Hz/60Hz± 5Hz
Output AC Voltage: 1P2W 220VAC± 1%
Output Frequency: 50Hz/60Hz± 0.1%
Protection: Low Battery, Overload, Short Circuit, Fault, EMC/EMI
Display: LCD or LED
Interface: RS-232/ RS485
Features & Advantages:
1. Adopting the advanced DSP technology and on-line double conversion IGBT technology
Design for the most demanding applications.
2. DC Input with 220VDC design
220VDC design for the DC input, 220VDC bus and battery are optional to adapt to the diversification of
Product application.
3. Overall Protection: To protect against the over temperature, overload, short circuit, surge, lighting and
The poor input to ensure the reliable operation of the UPS and load.
4. True Galvanic Isolation
Design to provide sufficient protection to the UPS and load.
5. Fast transfer time between inverter and bypass
The transfer time from inverter to bypass is zero second, from bypass to inverter is less than 0.002 second, such guarantee the true continuous and uninterruptible power supply to the load during the UPS
Maintenance.
6. Human Operation Design
Easy operation and without program constrain, any operational mistake made by the user will cause
No harm to the unit.
7. Advanced Parallel-Redundant Technology
Adopting the advanced technology of Parallet and N+1 Redundancy to meet the requirement of
Multiple UPS units parallel-operation.
8. Cool Start Function
Can be started without AC mains (with battery only) and protected from high surge current in DC loop.
9. Two-Phase locked loops and highly-efficient filter simultaneous curcuit are completely compatible with
Generator
10. Chinese/English LCD display panel
To display the UPS status, input voltage, output voltage, bypass voltage, Input frequency, output
Frequancy, load capacity, temperature and historical data, etc...
11. Plug & Play Modular design: Maintennace will be easier and faster, and the MTTR will be shortened to
Half an hour.
12. Intelligent Interface: Including dry contacts, RS485/RS232, MODBUS, support " Duty - Free ".
13. EMC/EMI protection, EN5009-2 approved and also compatible with GB/T17626 approved
14. Advanced Battery Management Modular (Option)
For the test, maintenance, alarm monitoring of the battery.
15. Modularization and Integration
Custom-made with the modularized and integrated UPS products, electric cabinet and feeder cabinet
To meet the various requirements from clients
| Technical Specifications: |
| Model | AL-ELE4KVA, AL-ELE5KVA, AL-ELE6KVA |
| Capacity | 4KVA, 5KVA, 6KVA |
| Input | AC Voltage | 1P2W 220VAC or 3P4W 380VAC |
| AC Voltage Range | ±25% |
| DC Voltage and Range | DC220V(rated voltage), Range: DC180V ~DC270V |
| DC110V(rated voltage), Range: DC90V ~DC135V |
| Frequency | 50Hz/60Hz±5Hz |
| Output | Rated Capacity | 4KVA, 5KVA, 6KVA |
| Voltage and Accuracy | 1P2W 220VAC±1% |
| Frequency and Accuracy | 50Hz/60Hz±0.1% |
| THD | 100% linear load, Harmonic Distortion<3% |
| Overload | 120%~150% and continuous 60 seconds, output via Bypass |
| ≥150% and continuous 1 second, output via Bypass |
| Output Power Fcator | 0.8 ~1, delay |
| Current Crest Ratio | 3:1 |
| Transfer Time | 0ms |
| Protection | Battery | Auto power-off due to Low Battery, breaker protection |
| Overload | 120%~150% and continuous 60 seconds, output via Bypass. |
| Automatic recovery when the load becomes normal |
| Short Circuit | Current limiting Auo-switch, Fuse and Breaker |
| Fault | Alarm and shift to Bypass when fail or interior over temperature |
| EMC/EMI | EN50091-2 Approved (Options: filter) |
| Display | LCD | To display Logo, UPS status, Load level, Battery level, Input/Output/Bypass Voltage, |
| Input /Output Frequency, Historical Data |
| LED | Main, Output, Battery, Bypass, Overload, Fault |
| Alarm | Abnormal mains | beep once / 4 seconds, auto muting after 90 seconds |
| Battery disconnected or low battery | beep once / 1 second until power off |
| Overload | beep continuously |
| Fault | beep continuously |
| Communication Port | RS-232/ RS485, supports RUPSII UPS/UPSilon 2000 monitoring software |
| Netagnet Static IP net monitoring software/Five terminals of dry contact employed to monitor the alarm |
| Environment | Temperature | -5 ºC~ 40ºC (23ºF ~104ºF) |
| Humidity | 0~95% (non-condensing) |
| Noise | < 50dB at 1 Meter |
| Standard Configuration: |
| 1. Input Isolated Transformer |
| 2. Output Isolated Transformer |
| 3. Full-bridge IGBT Inverter Modular |
| 4. Static Bypass Components |
| 5. Multi-Menu LCD Operating Panel |
| 6. Overall Protection Device |
| 7. Dry Contact, RS-232/ RS485 (MODBUS) Communication Port |
| 8. Parallet-Redundant Communication Port |
|
| Options: |
| 1. Expandable Parallet Redundancy |
| 2. Switch for Manual-Maintenance Bypass |
3. High Current Battery Charging ModularDescription: :
1. Accurate pure sine wave output; Strongly compatible with different loads;
2. Wide range of input and accurate output;
3. Smart RS232 communication port;
4. Perfect protection for overload, short circuit, over-voltage, low-voltage and over-heating etc;
5. LED Indicator;
6. UPS restart automatically when the main power recovers (optional);
7. Built-in super smart charger, shorten 50% of charging time;
8. Charging ability at low input voltage, 2 times more powerful than other.
Applications:
- High quality and availability of energy adapted to suit specific critical needs
- Covering a vast range of applications. Applied to key devices.
- Communication system.
- Computer network system.
- Some devices need harsh electric power environment.
Specifications:
Note: "L" means long back up model &"M" means standard model with inbuilt battery...
| MODEL | | T500M/L | T1000M/L | T2000M/L | T3000M/L | TX-T5000M/L | | CAPACITY | W | 500VA(350W) | 1KVA(700W) | 2KVA(1400W) | 3KVA(2100W) | 5KVA/3500W | | INPUT | Phase | Single | | Voltage | 100/110/127/220/230(+25%,-25%) | | Frequency | 60/50+/-10% | | OUTPUT | Phase | Single | | Voltage range(VAC) | 100/110/127/220/230+/-5% | | Frequency | Commercial power supply shared frequency with the commercial inversion state:60/50+/-0.5 | | Waveform | Sine wave | | Power Factor | P.F. | 0.7 | 0.7 | 0.7 | | BATTERY | Battery Type & Number | 12V/7AH x 1pcs | 12V/7AHX2PCS | 12V/17AH x 2pcs | 12v/17AHx2pcs | 12v/17AHx4pcs | | DC Voltage | 12VDC/24VDC | 24VDC | 48VDC | | Back up Time | Standard model: (halfload)>/=8min | | Recharge current | Long back up model: 15A max, standard model: 3A max | | TRANSFER TIME | Typical | Typical: 5ms (Including detection time) | | Display | LCD/LED | Optional | | PROTECTION | Full Protection | Discharge, overcharge, and overload protection | | PHYSICAL | Dimension, DXWXH (mm) | 375*130*190 | 452*192*338 | 452*192*338 | | Out packing Size, DXWXH (mm) | 495*490*320(2pcs/ctn) | 584*335*495(1pcs/ctn) | 584*335*495(1pcs/ctn) | | Net Weight (kgs) | 12/7(L) | 23/15.6(L) | 27/23.7(L) | 33.7 | | ENVIRONMENT | Operating Environment | 0~40 Degrees Centigrade, 0~90% relative humidity (non-condensing) | | Noise Level | Less than 40dB | | INTERFACE | Smart RS-232 | Support Windows family, Linux, Compaq True64, | | USB Option | N / A |
|
